Examine suitability of navigation and landing aids- ILS for Airports.

Enlist essential parts of Aircraft with figure.

Explain Air Traffic Control (ATC).

Discuss the characteristics of layout of Airport.

Give the functions of ICAO.

Discuss in brief how Instrument Landing System approach is useful in bad weather condition.

Determine the length of the runway to be provided after i) Correction for elevation and ii) Correction for temperature if runway length required for landing at sea level in standard atmospheric condition is 2500. Aerodrome elevation is 200m and reference temperature is 24 degree Celsius, temperature in the standard atmosphere for 200m is 15 degree Celsius and runway slope is 0.5 %.

Describe any five major elements influencing the planning of airports.

What is function of taxiway in airports? Draw cross sections of taxiway showing all components.

Length of runway under standard condition is 1620m with an elevation of 270m having airport reference temperature (ART) is 33° C and having effective gradient is 20 %. Calculate the corrected length of runway. Use and apply necessary checks.

Explain the types of imaginary surfaces of airport obstruction with neat sketch.

What are the factors to be considered in the geometric design of a run way.

Examine suitability of navigation and landing aids - ILS for Airports.

Inspect the role and functions of ICAO, FAA.

Explain Air Traffic Control (ATC).

Discuss the characteristics of layout of Airport.

Appraise zoning requirements regarding permissible heights of constructions and landing within the airport boundary.

Discuss in brief how Instrument Landing System approach is useful in bad weather condition.

Determine the length of the runway to be provided after i) Correction for elevation and ii) Correction for temperature if runway length required for landing at sea level in standard atmospheric condition is 2500. Aerodrome elevation is 200m and reference temperature is 24 degree Celsius, temperature in the standard atmosphere for 200m is 15 degree Celsius and runway slope is 0.5 %.

Discover how basic runway length is calculated and how corrections are made to it.

What is function of taxiway in airports? Draw cross sections of taxiway showing all components.

Length of runway under standard condition is 1620m with an elevation of 270m having airport reference temperature (ART) is 33° C and having effective gradient is 20 %. Calculate the corrected length of runway. Use and apply necessary checks.

Critcize master plan of one the busiest airport in the world.

What are the factors to be considered in the geometric design of a runway.

Mention the characteristics of good layout for an Airport.

Discuss in brief how Instrument Landing System approach is useful in bad weather condition.

Explain the types of imaginary surfaces of airport obstruction with neat sketch.

Classify the types of Airports.

List the basic patterns of runway configurations and explain them with neat sketch.

Enlist and explain the Air Traffic Control (ATC) Aids.

State and explain the factors affecting for site selection of an airport.

Define the term basic runway length. Explain briefly various corrections to be applied to obtain actual length of runway.

Illustrate how orientation of runway is done using Type I Wind Rose Diagram?

Identify and explain the characteristics of an Aircraft.

Determine the length of the runway to be provided after i) Correction for elevation and ii) Correction for temperature if runway length required for landing at sea level in standard atmospheric condition is 2500. Aerodrome elevation is 200m and reference temperature is 24 degree Celsius, temperature in the standard atmosphere for 200m is 15 degree Celsius and runway slope is 0.5 %.

Describe any five major elements influencing the planning of airports.

Explain the necessity of airport drainage.

What is BIM? Explain its benefits.

Give comparison between the Highway and Airfield pavement.

Explain the factors affecting the design of Airport capacity.

Briefly explain the application of Building Information Modelling (BIM) in airport engineering.

Write a note on planning and design of airport pavement.

What is the need of runway lightening and marking?

Explain with neat sketch - i) Approach Lights ii) Runway End Lights iii) Taxiway Lights

Explain the type of runway marking.

Draw the neat sketch of Heliport orientation.

Explain vertical take-off and landing, short take-off and Landing.

What is Runway side strips marking?

Give detailed classification of the bridges.

What are the characteristics of ideal bridge site?

What is Afflux? Give Maririman’s and Molesworth’s equation to calculate afflux.

Enlist the design loads to be considered in case of Bridge.

Explain the concept of linear waterway.

Write short note on economic span of bridge.

What is Culvert? Give its types.

Explain in details Temporary bridges.

Compare the salient features of Simply supported, continuous and cantilever bridges.

Give the functions of bearing in Bridges. Explain any one type of bearing with figure.

What is moveable bridge? Enlist all types. Explain Any one

Give factors affecting the location of the Culvert.

What is BIM (Building Information Modelling) for airport engineering? Explain in detail.

State and explain the factors affecting the design of Airport capacity.

What is airport drainage? What are the functions and basic requirements of airport drainage?

Write note on. i) Augmented reality ii) Virtual Reality

Explain planning and design of airport pavement.

Discuss in brief the necessity of airport drainage.

Describe the following terms with neat diagram. i) Runway marking ii) Taxiway marking

Why lighting and marking of airport is required? Enlist parameters Considered for heliport planning.

Explain marking of heliport with neat sketch.

Explain vertical take-off and landing (VTOL), short take-off and Landing (STOL).

Explain with sketch various markings on runways.

What is heliport? State the various helicopter characteristics.

Define bridge? What are the characteristics of an ideal site for a bridge?

Define following terms related to bridge. i) Effective span ii) Freeboard

The catchment area of a stream is of sandy soil with thick vegetation Cover and the area of the catchment is 12000 hectares. The length of the Catchment is 25 km and the fall in level from the critical point to the Bridge site is 180 meters. Calculate the peak run off for designing the Bridge, if the severest storm as recorded yielded 18 cm for rainfall of 4 hours. Area factor = 0.70 and Coefficient to account for Losses due to absorption = 0.20

Give the detail classification of bridge.

What are the different component parts of bridge explain with typical Cross section of bridge.

Calculate peak storm discharge from a catchment of 80,000 hectare The run off coefficient is 0.80 length of catchment is 65 km. the difference between the critical point and bridge is 150 m. The Rainfall in 8 hrs is 20 cm and area factor is 0.6

Explain with neat sketch the following: i) Bascule bridge ii) Suspension bridge

Define culvert mention 2 types of Culvert, Describe any one culvert with neat sketch.

State the purpose of providing bearing in bridges. Enlist different types of bearing.

Differentiate between temporary and permanent bridges with example.

Discuss any three types of movable Span bridges.

State the requirements of an ideal bridge bearings.

What is airport drainage? What are the functions and basic requirements of airport drainage?

Write note on. i) Augmented reality ii) Virtual Reality

Explain CBR method of flexible pavement design.

What is BIM (Building Information Modeling)? Explain in detail.

Define Airport Capacity. State the various factors affecting airport operating capacity.

Name the various methods used for designing flexible airport pavement and discuss in brief any one method.

Describe the following terms :- i) Apron marking ii) Landing Direction Indicator iii) Threshold marking

Discuss in brief the ICAO system of approach lighting .

What is heliport? State the various helicopter characteristics.

Explain marking of heliport with neat sketch.

What is VTOL and STOL? What are the advantages of STOL?

Why lighting and marking of airport is required? Enlist parameters considered for heliport planning.

What are the various methods commonly used in estimation of the flood discharge at a bridge site.

What do you mean by economical span? Derive the equation for economical span, stating clearly the assumptions made in the derivation.

Calculate flood discharge from a catchment of 65 square kilometer when the rainfall during a storm was 15 cm in two hours. The time of concentration is 20 hours and the run off coefficient is 0.35

Define following terms related to bridge. i) Effective span ii) Freeboard iii) Afflux

Sketch any two types of abutments and piers used in the construction of bridges.

Describe in brief IRC class A and Class B Loading used for the design of bridges.

Describe with neat sketch. i) Bascule bridge ii) Suspension bridge

Differentiate between temporary and permanent bridges with example.

Define culvert. Describe box culvert with neat sketch.

State the purpose of providing bearing in bridges. Enlist different types of bearing.

Discuss any three types of movable bridges.

Write short note on rigid frame bridges and cable stayed bridges.

Explain need of Building information modelling for Airport.

What is the aim of airport drainage and give functions of the airport drainage.

What is Ultimate and Practical Runway Capacity? Give Factors affecting on Runway Capacity.

What are the benefits of Building Information Modelling for Airport?

Write a Short note on Virtual Reality.

Give classification of airport pavement and explain in detail.

What are the different factors that affecting on the Airport Lighting?

Write a Short note on: Airport Marking.

Explain in brief Heliport and Stolport.

Write a short note on i) Marking of Heliports ii) Lighting of Heliports

What are the different characteristics of STOL Aircraft?

How to plan stolports? Give advantages of STOL Aircraft.

Give brief classification of different bridge structures.

What are the different components of bridge? Explain in detail with the help of neat sketch.

What is economic span of bridge? Give Derivation for economic span of bridge.

What are the different types of Culvert? Explain in detail with the help of neat sketch.

What is causeway? Explain the different types of causeway with the help of neat sketch.

Explain Preliminary and detailed survey work to be done before construction of bridge structure.

Give explanation on Direct Method of Calculating the maximum flood discharge.

From the following data, Calculate linear Waterway required for a bridge to be constructed across the River: Catchment Area = 800 Hectares Maximum intensity of Rainfall = 1.21 cm per hour Runoff Coefficient = 0.80 Permissible Velocity = 120 cm/ second Average depth of flow = 180cm

Explain in details Movable - Span Super Structures with the help of neat Sketches.

Explain Cut Boat Bridge, Flying Bridge, Lift Bridge and Swing Bridge with the help of neat sketches.

Explain with suitable example, application of Building Information Modelling (BIM) in airport engineering.

Discuss in brief Augmented Reality (AR) and Virtual Reality (VR) in airport planning and design.

State and explain the factors affecting the design of Airport capacity.

Explain planning and design of airport pavement.

State the comparison between highway and airfield pavements.

Discuss in brief the necessity of airport drainage.

What do you understand by the term visual aid in connection with airport? Name the different visual needs.

Describe in brief the following : i) Taxiway shoulder marking ii) Apron marking

Explain vertical take-off and landing (VTOL), short take-off and landing (STOL).

What are the chief characteristics of the helicopter.

Explain with sketch various markings on runways.

How do you decide the size of the heliport area? Sketch the layout of a typical heliport for large size helicopters.

Discuss briefly the characteristics of an ideal site for a bridge.

The catchment area of a stream is of sandy soil with thick vegetation cover and the area of the catchment is 8000 hectares. The length of the catchment is 20 km and the fall in level from the critical point to the bridge site is 160 meters. Calculate the peak runoff for designing the bridge, if the severest storm as recorded yielded 16 cm of rain 4 hours.

What is necessity of providing cut-water in a bridge pier? Sketch the various shapes of cut water.

How will you account for the following in the design of highway bridge : i) Impact ii) Wind Load iii) Forces due to water currents

A bridge is proposed to be constructed across an alluvial stream carrying a discharge of 300 meter cube per second. Assuming the value of silt factor = 1.1 determine the maximum scour depth when the bridge consists of i) Two spans of 35 m each ii) Three spans of 30 m each

Describe with neat sketch the any two types of wing walls indicating their suitability.

Distinguish between : i) Culvert ii) Causeway and Submersible bridge

Compare the salient features of Simply supported, continuous and cantilever bridges.

State precisely the purpose of providing bearings in bridges. Name the various types of bearings.

What is culvert? State and explain any two types of culverts.

Explain with neat sketch the following : i) Bascule bridge ii) Lift bridge iii) Transporter bridge

State the requirements of an ideal bridge bearings.